
Once installed, the patented SilverSafe Power Pack using the Electro-cathodic Particle Dislodgement process introduces trace amounts of silver ions into the water to kill bacteria prior to filtration. This will also assist the unit to remain free of bacteria for extended periods when not being used. The unit will require new batteries and carbon cartridge about once a year. The ceramic filter may be scrubbed clean whenever the water flow falls to an inconvenient level.
| Installation: | ½" fittings and bench-top touch-tap supplied. |
| Flow Rate: | 3 litres per minute using touch-tap. 6 seconds to fill a standard drinking glass (6 litres per minute if connected to existing tap). |
| SilverSafe Power Pack: | Will treat approximately 4000 litres before battery replacement. Battery powered unit Indicator lights will advise on correct operation and battery replacement status. Simple battery replacement. Totally exhausted power pack needs to be replaced after about 250,000 litres. Residual silver in water: less than 0.01 mg per litre. (NHMRC (Australia) and EPA(USA) approved maximum 0.1 mg per litre). |
| Filtration Cartridges: | Filter 1: Radial-flow activated-carbon 5 micron filter. Filter 2: 0.4 micron ceramic sediment filter Simple screw off housing (wrench supplied). |
| Servicing: | With normal use SilverSafe power pack will require new alkaline batteries about once a year. Activated-carbon filter will require replacement about once a year. Ceramic filter may be scrubbed clean. |
Apart from the touch-tap, nothing is visible on the bench top. There is nothing to clutter the clean lines of today’s designer kitchens.
The Silver-Safe Electro-cathodic Particle Dislodgement process is patented world-wide* and continued research will ensure that Homepure maintains its leadership in water purification technology.
*Aust. Patent Nos. 95/3911, 95/5627, PCT 95/00280